Scrap Metal Dealer vs Recycler: What’s the Difference in Singapore?
If you’ve searched for scrap metal services in Singapore, you’ve seen four similar terms thrown around: dealer, recycler, buyer, and collector. They overlap, but they mean slightly different things operationally — and the distinction can affect your payout.
Scrap Metal Dealer
A scrap metal dealer is the licensed commercial operator who buys scrap from the public and sells it on — usually to recyclers/processors or directly to foundries. They hold NEA licenses, maintain a yard, and handle the financial side (weigh, grade, pay). Molten Steel is a dealer — see our Singapore scrap yard at 170 Gul Circle.
Scrap Metal Recycler
A recycler focuses on the processing step — shredding, smelting, remelting scrap back into usable raw material (ingots, billets, wire rod). Some recyclers also buy from the public; most buy from dealers in bulk. Molten Steel is licensed to recycle scrap metal in Singapore, but our primary public-facing role is dealer.
Scrap Metal Buyer
“Buyer” is the general commercial term — anyone who pays cash for scrap. A buyer might be a dealer, a recycler, or (rarely) an unlicensed operator. Always verify licensing before selling significant volumes — see our guide to selling scrap metal in Singapore for red flags.
Scrap Metal Collector
A collector is operationally focused — the pickup truck and driver. Dealers like us run our own collection fleet; some collectors are third-party contractors. Either way, the collector is who weighs and pays at your site. Book a scrap metal collector.
Who Should You Sell To?
For individuals and small businesses: a licensed dealer with their own yard. Direct pricing, no middleman margin. That’s us.
For very high-volume generators (500+ tonnes monthly): a dealer with direct recycler/foundry contracts can cut margin layers. Ask about trading arrangements.
The Bottom Line
Don’t get hung up on the terminology. What matters: is the buyer licensed, do they benchmark against LME, and will they pay you same-day? Molten Steel checks all three.
Dealer vs Recycler vs Buyer vs Collector at a Glance
| What they do | Who they deal with | Pays you? | |
|---|---|---|---|
| Dealer | Weighs, grades and pays for scrap; runs a yard | Public, contractors, businesses | Yes |
| Recycler | Shreds, melts and refines scrap into new metal | Mostly dealers, in bulk | Sometimes |
| Buyer | General term for anyone paying for scrap | Anyone | Yes |
| Collector | Picks up scrap from your site | Homes, sites, offices | Yes, or on behalf of a dealer |
What Does a Scrap Metal Collector Do?
A scrap metal collector saves you the trip to the yard. A typical collection runs like this:
- You send details — photos, a rough weight and your location.
- You get a quote based on the grades in the photos and today's rates.
- The truck arrives and the scrap is loaded.
- The scrap is weighed and graded, either on site or back at the yard, depending on the load.
- You are paid — with Molten Steel, the same day by PayNow or bank transfer, with an itemised receipt.
We collect free anywhere in Singapore once a load meets our pickup minimum. Smaller amounts can be dropped off at our scrap yard at 170 Gul Circle, Monday to Saturday 8:30 AM–6:30 PM and Sunday 8:30 AM–3:30 PM. See our scrap metal collection page for how to book.
Karung Guni vs Scrap Metal Dealer
Many Singaporeans first sell scrap to a karung guni — the rag-and-bone collectors who go door to door for newspapers, old electronics and household metal. They are convenient for small amounts from home. For anything bigger, a dealer usually pays more:
- Grading — a dealer pays by grade, so clean copper is paid as copper, not as mixed scrap.
- Weighing — a dealer weighs on calibrated scales and gives you a receipt.
- Volume — a dealer can take workshop, renovation and site quantities.
- Paperwork — businesses get receipts, and a disposal certificate on request.
For a fuller comparison, see karang guni vs scrap metal dealer. If you are wondering what else earns money, see recycle for cash in Singapore.
How to Check a Scrap Metal Buyer Is Legitimate
- A fixed yard address you can visit, not just a phone number.
- ID checks — a proper buyer asks for your NRIC or FIN, or your company's ACRA bizfile.
- Weighing in front of you, or a weight record you can check.
- An itemised receipt showing each grade, its weight and its rate.
- Prices linked to the market — rates that move with the LME, not one flat number for everything.
Dealer, Recycler and Collector FAQs
Is a scrap metal collector the same as a dealer?
Not always. Some collectors are independent drivers who resell to a dealer. Molten Steel is a dealer with our own collection, so there is no middleman.
Do metal collectors charge for pickup?
We do not, once the load meets our pickup minimum. Smaller loads can be dropped off at our yard instead.
Should I sell to a recycler directly?
Only if you generate very large volumes of one grade. For most sellers a dealer pays better and is easier to deal with.
What do I need to sell scrap metal?
Your NRIC or FIN, or your company's ACRA bizfile if you are selling for a business.
Dealers, Recyclers and Collectors: More Answers
Do scrap metal dealers buy precious metals?
Some do, but Molten Steel does not buy gold, silver or circuit boards. The only precious-metal scrap we buy is catalytic converters, which are priced on their platinum, palladium and rhodium content. Jewellery and bullion go to precious-metal dealers or refiners. For catalytic converters, see our catalytic converter scrap page.
What happens to scrap metal after a dealer buys it?
The dealer sorts and grades it, then bales, shears or bags it to the size and specification smelters need. Finished lots are sold to smelters and foundries, which melt the metal and cast it into new ingots, billets or rod. That is the point where the scrap is actually recycled. See how smelters process scrap metal.
Why does a scrap dealer pay less than the LME price?
The LME price is for pure, refined metal delivered to an exchange warehouse. Scrap still has to be sorted, processed, shipped to a smelter and refined, and the dealer carries those costs and the market risk in between. The gap is wider for mixed or dirty grades and narrower for clean ones. Read how the LME shapes what you’re paid.
Will a scrap metal dealer take old electronics?
Only the metal parts. Molten Steel buys metal from electronics and electrical equipment, such as cable, transformers, server racks, heat sinks and UPS lead-acid batteries. We do not take circuit boards or whole devices and do not offer data destruction. Household electronics belong in e-waste collection points. See e-waste metal recovery.
Sell your scrap today. Molten Steel buys at LME-benchmarked rates across Singapore. Call +65 9106 7577 or WhatsApp.
Related: Today’s prices · How to sell scrap metal · All services
