
Aluminium Supplier Singapore
Graded aluminium scrap for foundries and manufacturers
Molten Steel isn’t just a buyer of aluminium scrap in Singapore — we also supply graded aluminium scrap to foundries, manufacturers, and regional smelters. If you’re running an aluminium re-melt operation or need a reliable scrap feedstock, talk to our trading desk.
What We Supply
- 6063 extrusion — clean, unpainted, construction-grade. Bulk bale weights available.
- 6061 / 6082 structural — heavier-gauge aluminium from industrial offcuts.
- Cast aluminium — engine blocks, transmission cases, sorted iron-free.
- Clean sheet and clip — aluminium sheet offcuts, guaranteed alloy grade on request.
- Turnings (6061, 6063) — machining swarf, dried and pressed.
- UBC (used beverage can) — subject to availability, sorted and baled.
Minimum Order and Delivery
- Standard supply: 5 tonnes minimum per grade.
- Packaging: baled, bagged in FIBC, or loose in open-top containers.
- Delivery: direct to smelter or staged at your processing site.
- Analysis certificates available on request for critical alloy applications.
Pricing
Priced against LME aluminium daily with grade-specific premiums. See our LME guide for how the math flows, or contact trading for a current supply offer.
Why Source from Molten Steel
- Consistent supply — our buying pipeline across the Singapore industrial belt feeds a steady aluminium stream.
- Grade consistency — sorted and tested at our 170 Gul Circle yard with XRF verification.
- Clean, smelter-ready — minimal iron, minimal paint, minimal plastic contamination.
- Documentation — COA, weigh tickets, chain-of-custody on request.
On the other side, if you're selling aluminium scrap in Singapore, we’re the top-of-market buyer for clean graded grades.
Scrap Aluminium Feedstock vs New Aluminium Stock
We supply graded aluminium scrap for remelting — feedstock for foundries, die-casters, secondary smelters and traders. We do not stock new aluminium sheet, bar or extrusions cut to size for fabrication. If that is what you need, you are looking for a metal stockist.
Recycled aluminium is a lower-cost, lower-carbon input than primary metal: remelting scrap uses only a fraction of the energy needed to make aluminium from ore. For many castings and extrusions, well-sorted scrap does the same job.
Who We Supply
- Foundries and die-casters — cast aluminium and clean extrusion for remelt.
- Secondary smelters — sorted grades for alloy ingot production.
- Extrusion plants — clean 6063 for direct remelt.
- Regional traders — consolidated lots for export.
How a Supply Order Works
- Tell us what you need — grade, tonnage, packing and delivery point.
- We confirm availability and send photos. Analysis certificates are available on request.
- You get a supply offer priced against the LME aluminium price, with a grade premium or discount.
- We load and deliver — baled, bagged or loose, to your site or smelter, with weigh tickets and documentation.
Aluminium Grades: What to Ask For
| Grade | Typical use | What to specify |
|---|---|---|
| 6063 extrusion | Extrusion billet, remelt | Painted or unpainted, iron-free |
| 6061 / 6082 | Structural alloy remelt | Alloy confirmation (XRF) |
| Cast aluminium | Die-casting, foundry ingot | Iron content, oil-free |
| Sheet and clip | Rolling and remelt | Single alloy or mixed |
| Turnings | Secondary smelting | Dry, low-oil, pressed |
| UBC | Can sheet remelt | Baled, low contamination |
Aluminium Supply FAQs
What is your minimum order?
Standard supply is 5 tonnes per grade.
Do you supply new aluminium sheet or bar?
No. We supply graded aluminium scrap for remelting, not new stock for fabrication.
How is supply priced?
Against the LME aluminium price, with a premium or discount for each grade.
Can you provide alloy analysis?
Yes. We test with XRF at our 170 Gul Circle yard, and analysis certificates are available on request.
Buying Aluminium Scrap Feedstock: More Answers
Is the same aluminium scrap grade available every month?
Not always. Our aluminium supply comes from the scrap we buy across Singapore, so the volume and mix of grades change from month to month. We do not guarantee fixed tonnages of a particular grade. Tell us the grade, tonnage and timing you need, and we will confirm what is actually in yard stock before making an offer. For regular volumes, ask about scrap metal trading.
Why does iron content matter in aluminium scrap?
Iron is hard to remove once it has melted into aluminium. It forms brittle compounds that reduce ductility and can cause problems in castings and extrusions. That is why foundries specify iron-free or low-iron scrap and why steel bolts, inserts and screws are removed before supply. For background on which alloys suit which uses, see our aluminium alloy grades guide.
Is painted aluminium extrusion suitable for remelting?
Yes, but it behaves differently from bare extrusion. The paint or powder coat burns off in the furnace, which lowers metal yield and adds dross and fumes. Many melters therefore pay less for painted material or specify unpainted only. When you request supply, state whether painted extrusion is acceptable for your process. See clean vs dirty scrap grading for how contamination affects value.
What is the difference between aluminium scrap and aluminium ingot?
Ingot has already been melted, refined and cast to a known alloy chemistry, so it can go straight into production. Scrap still needs melting, fluxing and alloy correction, which is why it costs less but takes more processing. Molten Steel supplies graded scrap for remelting, not ingot or new mill stock. Ask for photos and an XRF reading of the actual lot before you commit.
How do I choose an aluminium scrap supplier in Singapore?
Choose a supplier with a fixed yard, a valid NEA approval and a clear description of each grade. Ask for photos of the actual lot, XRF results for alloy grades, and weigh tickets on delivery. A supplier who will not describe the material in writing is a risk. Our guide on verifying a licensed scrap dealer lists the checks.
Contact Our Aluminium Trading Desk
Our Other Metal Supply Services
We supply graded scrap across non-ferrous metals to foundries and fabricators in Singapore and the region:
- Copper supplier Singapore — bright bales, pipe, stripped cable
- Stainless steel supplier Singapore — 304, 316, 309/310 grades
- Stainless steel pipe supplier — 304L, 316L recovered tubing
- Stainless steel plate supplier — sheet and plate
- Stainless steel sheet supplier — thin gauge 1-3mm
