Scrap Metal Recycling in Singapore
Licensed metal recycling company since 2006 · Ferrous & non-ferrous · Documented for audits
Molten Steel is a licensed metal recycling company in Singapore, operating from our 170 Gul Circle yard since 2006. We buy, sort, grade and process ferrous and non-ferrous scrap from factories, shipyards, contractors and facility teams, then send it to licensed smelters as feedstock for new metal.
Recycling metal with us is paid, not a disposal cost. Rates are benchmarked to the LME — see today's scrap metal prices or estimate your load with the scrap metal calculator. Every load is weighed on a certified weighbridge, graded in front of you and paid by PayNow or bank transfer, typically the same day.
What Our Metal Recycling Covers
Non-ferrous metals
- Copper and copper cable
- Aluminium — extrusions, sheet, cast, cans
- Brass and bronze
- Stainless steel — 304, 316, 309/310
- Lead and lead acid batteries
- Zinc and special alloys (CuNi, Inconel, duplex)
Ferrous metals
- HMS 1 & 2 and structural steel
- Cast iron — engine blocks, pipes, machinery bases
- Rebar, plate offcuts, turnings and mixed ferrous
Equipment with recoverable metal
- Used machinery and industrial equipment
- Transformers, electric motors and AC compressors
- Industrial electronics and cable
Our Scrap Metal Recycling Process Step-by-Step
Every consignment moves through a documented eight-step workflow so traceability, grading and payment stay auditable. This is the same process our NEA licensing records reference.
- Intake & documentation — Weighbridge ticket generated on arrival at our Gul Circle yard; vehicle, consignor and waybill logged against the NEA General Waste Collector register.
- Visual segregation — Incoming load separated into ferrous, non-ferrous and mixed streams. Obvious contaminants (plastics, rubber, oil-soaked waste) flagged for rejection or decontamination.
- XRF verification — Handheld X-ray fluorescence analyser confirms alloy grade for copper, brass, stainless steel and other non-ferrous grades before pricing.
- Weighing & grading — Material weighed on a Weights & Measures-verified weighbridge (±0.1%); grade and moisture deductions (if any) recorded on the ticket.
- Pricing reference — Settlement quoted against same-day LME cash prices less standard processing margins.
- Processing — Material baled, sheared or shredded to smelter specification. Cable is stripped; motors and transformers are broken down for copper recovery.
- Smelter dispatch — Finished bales containerised and shipped to licensed downstream smelters in the region; chain-of-custody paperwork retained for seven years.
- Payment — PayNow or bank transfer, typically the same day the ticket is closed and always within 24 hours. Account holders settle on agreed terms.
Recycling Documentation for Businesses
Procurement, EHS and sustainability teams usually need more than a payment. On request we provide:
- Weighbridge tickets with gross, tare and net weight for every load
- Grade breakdown showing what was recovered and at what rate
- Consignment notes and downstream smelter declarations confirming the metal was recycled, not landfilled
- Monthly tonnage and recovery summaries for contract customers — useful for ESG and sustainability reporting
Our licence details are on the licensing & credentials page. If you are clearing a whole site, see scrap metal disposal and our bins & trailers for how we receive large volumes.
Why Recycle Metal
- Metals recycle without losing their properties. Steel, copper and aluminium can be re-melted repeatedly, so scrap is a direct substitute for mined ore.
- It saves energy. Recycled aluminium needs a small fraction of the energy of primary aluminium, and recycled steel avoids most of the ore mining and blast-furnace stage.
- It keeps metal out of landfill. Singapore has one landfill, Semakau — every tonne recycled is a tonne that does not need space there.
- It pays. Scrap has a market price, so recycling turns a waste stream into revenue.
More on this: recycling vs mining, Singapore's circular economy and scrap metal, and is scrap metal genuinely recycled?
Who Uses Our Recycling Service
Our recycling throughput is a mix of industrial generators, trade customers and municipal clients. Typical profiles below.
Contract manufacturers and precision machine shops
CNC machining and stamping operations across Jurong, Tuas and Sungei Kadut generate 2-10 tonnes of turnings, drops and offcuts monthly. We supply segregated bins on site and collect on scheduled rotations.
Marine and offshore yards
Shipyards in Tuas and Jurong Island produce heavy ferrous and non-ferrous arisings from refits and decommissioning — propellers, condenser tubes, valves and structural steel. Typical campaigns run 20-200 tonnes over a drydock window. See marine scrap.
Electrical and M&E contractors
Installers and demolition M&E subcontractors sell recovered copper cable, busbar and aluminium conduit — usually 200 kg to 3 tonnes per project. We pay against stripped versus unstripped grades with the ratio confirmed on delivery.
Facility managers and landed estates
Building owners clearing old aircon systems, water tanks and steel gates — smaller but recurring volumes (50 kg to 2 tonnes). Smaller loads are quickest as drop-offs at our yard.
Government agencies and town councils
Public-sector tenders for infrastructure replacement — lamp posts, signage, guardrails — typically contracted per tonne with closed-bid pricing tied to LME.
Real Recycling Examples
Representative jobs from recent months, stripped of identifying details.
Jurong electronics plant, line retrofit: 14 tonnes of mixed stainless steel (304/316) structural frames replaced during a plant upgrade. XRF-verified on intake, baled within 48 hours. Settlement issued the day after collection — the write-down on the capex replaced offset roughly 9% of the new line's steelwork budget.
Tuas marine yard, propeller decommissioning: six nickel-aluminium bronze propellers (~6.4 tonnes combined). Each blade XRF-confirmed to C95800 spec before weighing. Recovered value in the five-figure range offset part of the drydocking invoice.
Woodlands M&E contractor, cable clearance: 1.8 tonnes mixed copper cable from a data centre decommissioning — stripped bright ratio assessed on delivery and priced against the daily copper scrap rate. PayNow within 24 hours.
Coverage & Volume
We collect and receive scrap across all Singapore industrial zones — Jurong, Tuas, Joo Koon, Sungei Kadut, Woodlands and central/east industrial estates — with our Gul Circle yard as the central processing point. Volumes range from 50 kg drop-offs up to 500-tonne demolition arisings handled over multiple loads. For sustained industrial accounts (monthly 5+ tonnes) we structure scheduled uplifts with dedicated bins.
Scrap Metal Recycling FAQ
Is Molten Steel a licensed metal recycling company?
Yes. Molten Steel Pte Ltd holds a valid NEA General Waste Collector licence for scrap metal and has operated continuously since 2006. Details on our credentials page.
What happens to my scrap after recycling?
It is sorted, graded and processed to smelter specification, then supplied to licensed foundries and smelters in the region, where it is re-melted into new metal.
Do I need to sort my scrap before delivery?
Sorting helps, but it is not mandatory. Mixed loads are segregated on intake by our yard team. Clean, pre-sorted loads (for example separated copper, brass, stainless) attract higher per-kilo rates because they bypass processing deductions.
What is XRF verification and why does it matter?
XRF (X-ray fluorescence) is a non-destructive analyser that reads alloy composition in seconds. We use it to confirm grade before pricing — particularly important for copper alloys, stainless grades and lead-containing brass, where visual identification can misprice a load by 30-40%.
How are recycling prices calculated?
Ferrous grades are quoted on a domestic benchmark; non-ferrous settle against the LME cash price less a processing margin. See our prices page or calculator.
Is there a minimum quantity?
No minimum for drop-offs at our Gul Circle yard. Pickup is free islandwide once a load meets our minimum quantity — WhatsApp a photo and rough weight and we will confirm.
Do you issue recycling documentation for ESG reporting?
Yes. Weighbridge tickets, consignment notes and downstream smelter declarations are available on request, and contract customers can receive monthly tonnage and recovery summaries.
Can you recycle e-waste or batteries?
We buy lead acid batteries and the metal content of decommissioned equipment and industrial electronics. Household e-waste belongs in the public e-waste recycling bins.
Do I need to be a business to recycle with you?
No. We buy from individuals, SMEs and large corporates. Bring your NRIC or FIN, or your company's ACRA bizfile.
How do I get paid?
PayNow or bank transfer, typically the same day the ticket is closed and always within 24 hours. Cash for smaller amounts; account holders settle on agreed terms.
See why clients choose Molten Steel for recurring work, or our ferrous vs non-ferrous guide to pre-sort before delivery. Selling graded scrap in bulk or buying feedstock? See scrap metal trading.
FAQ · Testimonials · Glossary · LME guide · Licensing & credentials
Metal Recycling in Singapore: More Answers
Do you recycle precious metals like gold or silver?
No. The only precious-metal scrap Molten Steel buys is catalytic converters, which contain platinum-group metals. We do not buy gold, silver or circuit boards for precious-metal recovery. Everything else we recycle is base metal: copper, aluminium, brass, stainless steel, lead, zinc and ferrous grades. For catalytic converters, see our catalytic converter scrap page.
What are base metals in metal recycling?
Base metals are common industrial metals that corrode or oxidise more readily than precious metals. In recycling, the main ones are copper, aluminium, lead, zinc, nickel and tin, plus iron and steel. The non-ferrous base metals have global reference prices on the London Metal Exchange, which is why scrap rates for them move with the market. Our LME guide explains how.
Where is your metal recycling yard, and when can I drop off?
Our yard is at 170 Gul Circle, Singapore 629624. It is open Monday to Saturday 8:30am–6:30pm and Sunday 8:30am–3:30pm, and on some public holidays, so call ahead on those days. Bring your NRIC or FIN, or your ACRA bizfile for a business. Loads are weighed, graded and paid on the spot. More on the scrap yard page.
Do you recycle lithium-ion batteries?
Yes, we buy lithium-ion battery packs from e-bikes, PMDs, power tools, UPS and solar systems, and EVs. Packs are priced by chemistry, weight and condition rather than a flat per-kg rate. Damaged or swollen packs must be declared before delivery. Household phone batteries and AA cells go to e-waste bins, not to us. See battery recycling and disposal.
Can I recycle metal from a home renovation?
Yes. Old gates and grilles, aluminium window frames, copper pipe, brass taps and stainless sinks are all bought by weight and grade. Separate the metals where you can and remove glass, wood and rubber, because clean, sorted metal pays more. Renovation amounts are usually dropped off at our Gul Circle yard. See recycle for cash in Singapore for what pays best.
