Marine Scrap Metal Singapore

Marine Scrap Metal Singapore

Shipyard, ship-repair, marine equipment scrap · Bronze, brass, stainless 316, super-duplex, CuNi piping · Tuas & Jurong yard pickup

Molten Steel buys marine scrap metal from Singapore’s shipyards, ship-repair operators, marine equipment manufacturers, and offshore-services contractors. Typical loads come off drydock turnarounds, vessel deconstruction, equipment refits, and end-of-life vessel scrapping. We service the Tuas, Jurong, Pasir Panjang, and Loyang marine clusters with our own low-loader and crane truck, and pay top rates for the non-ferrous content that drives marine scrap value.

What We Buy From Marine Yards

  • Hull and structural plate — mild steel hull sections from vessel deconstruction, plate offcuts from new-build fab
  • Propellers — manganese bronze, nickel-aluminium bronze (NAB), brass, stainless 316/317, aluminium. See our scrap propeller page for the full price band.
  • Copper-nickel piping — CuNi 90/10 + 70/30 seawater piping, condenser tubing, heat-exchanger bundles. See our special alloys page for CuNi pricing.
  • Bronze fittings, bushings, valves — through-hulls, sea-chests, scuppers, propeller shaft bearings, seawater valve bodies
  • Stainless steel 316 — deck hardware, food-service galleys, ladders, railings, davits, RAS hardware
  • Super-duplex stainless (SAF 2507, Zeron 100) — offshore subsea hardware, FPSO process piping
  • Aluminium — superstructure plate (5083, 5086), accommodation block panels, lifeboat bodies
  • Anchor chain & mooring hardware — high-tensile carbon steel, often heavy ferrous lots
  • Engine room non-ferrous — copper cable harnesses, brass instrumentation, bronze gear-train components

How We Work With Shipyards & Repair Yards

  1. Drydock-cycle scheduling. We coordinate pickup windows with the yard’s drydock turnaround timeline so removed material moves out without holding up the next docking.
  2. Lift coordination. For main-engine props, anchor chain, large heat exchangers and oversized assemblies we deploy our low-bed trailer + crane support; for routine refit material we use 40-footers and bins.
  3. Alloy verification on dock. Handheld XRF on every non-ferrous lot before settlement — the reading determines the final rate. No dispute at payment time.
  4. Single-ticket consolidation. For multi-prop and mixed-alloy refit lots we issue one weighing ticket per pickup with the alloy breakdown attached.
  5. Same-day settlement on verified loads — bank transfer to the yard’s nominated account.

Indicative Rates for Marine Scrap

📋 Prices indicative only. Rates benchmark against the London Metal Exchange and adjust with market movement. For a firm per-kg quote on your specific load, call +65 9106 7577 or WhatsApp us — we quote free, no obligation.

MaterialIndicative rateNotes
Hull / structural mild steel$380–$390/tonneHMS 1 / HMS 2 grading on thickness
Manganese bronze propellerCall to enquireSee propeller page
Nickel-aluminium bronze (NAB)Call to enquireNaval, high-load commercial
Copper-nickel 90/10 pipingCall to enquireSee special alloys
Copper-nickel 70/30 condenser tubingCall to enquireHigher Ni premium
Stainless 316 deck hardware$2.90/kgMarine grade
Super-duplex (SAF 2507, Zeron 100)Call to enquirePhotos + qty for quote
Bronze fittings / valves$9.00–$12.30/kgYellow vs red brass / bronze
Aluminium superstructure (5083/5086)$2.90–$3.50/kgMarine-grade alloys
Final rate confirmed after XRF verification on alloy.

Drydock-Cycle Scrap Recovery

A vessel drydocking generates a predictable scrap stream: replaced anodes (zinc & aluminium), worn bushings and bearings (bronze), removed fasteners (stainless 316), cropped piping (CuNi seawater, ferrous engine-room), retired propellers (NAB or manganese bronze), and selectively replaced hull plate. The economic value of this stream is concentrated in the non-ferrous fraction — CuNi piping, bronze props, super-duplex hardware — which can run several thousand dollars per drydock for a mid-size workboat and tens of thousands for a merchant vessel.

We coordinate around the drydock schedule: pre-docking call to confirm what’s coming off, dedicated bins set down before the yard team starts removal work, scheduled pickup as the next vessel goes in. For yards running back-to-back drydocks this means the scrap programme never bottlenecks the docking schedule.

Vessel Deconstruction & End-of-Life Scrapping

For complete vessel scrapping or major deconstruction projects we work alongside the BCA-licensed cutting contractor on metal recovery scoping. Typical workflow: contractor handles the cutting and lift; Molten Steel handles the metal stream from the dock to the smelter. We can stage 40-footers for hull plate accumulation and bring our low-bed for engine-room machinery. Settlement is per-load against alloy verification, with the contractor getting one consolidated statement at end-of-project.

Marine Locations — Where We Pick Up

Tuas shipyard cluster (Sembcorp Marine Tuas, Pacific International, ASL Marine, Western Marine), Jurong Marine Base, Pasir Panjang & Keppel waterfront, Loyang Offshore Supply Base for offshore-services contractors, Sungei Kadut for smaller barge-and-workboat yards. Free pickup for non-ferrous lots over 50 kg; ferrous loads picked up against tonnage minimums.

How We Receive Marine Loads — Bins, 40-Footer, Low-Bed

Marine loads run the full size range — a single bronze through-hull off a yacht refit at one end, a 5-tonne main-engine propeller or a complete heat-exchanger bundle at the other. Receiving infrastructure scales with the load; we coordinate lift and transport directly with the yard.

  • Walk-ins accepted at our 170 Gul Circle yard during business hours (Mon–Sat 8:30am–6:30pm, Sun 8:30am–3:30pm).
  • Free scrap bins on site for ongoing producers — we drop bins in common sizes and rotate them on a schedule you choose. Sorted bins earn a higher price per kg.
  • 40-footer trailer for long stock — structural beams, profile material, bar, tube, and any item that exceeds standard truck-bed length.
  • Low-bed trailer for oversized cargoes — large machinery, vessel internals, complete heat-exchanger bundles, generator sets, transformers, and decommissioned plant.

We lead with receiving infrastructure rather than on-site removal labour. That keeps our per-kilogram quotes ahead of dealers who bundle haulage labour into the price — you handle the lift (or your contractor does), and we handle everything from the weighbridge onward. For larger clearances where the job size justifies it, our own team can handle the removal too.

Frequently Asked Questions

Do you collect marine scrap directly from shipyards?

Yes — we run dedicated routes through the Tuas, Jurong, Pasir Panjang, and Loyang marine clusters with our own low-loader and crane truck. Free pickup for non-ferrous lots over 50 kg; ferrous picked up against tonnage minimums. Drydock-aligned scheduling for repair yards.

What’s the price for copper-nickel seawater piping?

CuNi pipe is priced individually on photos + qty — rates depend on grade (90/10 vs 70/30), wall thickness, condition, and current LME-plus-premium benchmarks. Send photos to +65 9106 7577 via WhatsApp. See our special alloys page for the full pricing approach.

Do you handle full vessel scrapping?

We handle the metal-recovery side — we work alongside the BCA-licensed cutting contractor who handles the cutting and lift. Settlement is per-load against alloy verification. For shipyards or contractors planning deconstruction, call us early so we can scope hull-plate staging and engine-room non-ferrous recovery.

How is propeller alloy verified?

Handheld XRF spectrometer at the point of settlement. The reading is shown to the seller and the rate follows the verified alloy — manganese bronze, NAB, aluminium bronze, brass, or stainless. Stamped grade codes near the hub help quote-on-photos accuracy. See our propeller page.

Do you accept anchor chain and mooring hardware?

Yes — high-tensile carbon steel anchor chain, mooring hardware, towing hardware. Priced as ferrous (HMS 1 thickness band) for typical anchor-chain link weight. We can pick up directly from the yard with our 40-footer.

Is Molten Steel licensed to buy marine scrap in Singapore?

Yes — we are an NEA-approved scrap metal dealer. Our licence covers marine scrap acquisition. See our licensing page.

Marine Scrap: More Questions From Yards

Do you buy marine cable from ship refits?

Yes. Copper power and control cable from engine rooms and vessel refits is bought by weight and graded on its estimated copper yield. Thick power cable pays more per kilo than thin control wire. Armoured cable is accepted, and the steel armour is taken into account when it is graded. Keep cable separate from other scrap. See copper cable scrap.

Can boat owners sell marine scrap, or only shipyards?

Boat owners can sell marine scrap too. A bronze through-hull from a yacht refit, a small propeller or stainless deck fittings can be dropped off at our 170 Gul Circle yard. Bring your NRIC or FIN. Alloys are confirmed by XRF testing before pricing, and you are paid by PayNow or bank transfer with an itemised receipt. See the scrap yard page.

Do you buy marine engines and generator sets?

Yes, as scrap. Decommissioned engines and generator sets are priced on their recoverable metal: cast iron or aluminium blocks, steel frames and copper windings in alternators. Oil, fuel and coolant must be drained first. Large units are moved on our low-bed trailer, with the lift coordinated with the yard. See industrial machinery and equipment.

Is oily or fuel-contaminated marine scrap accepted?

Yes, if it is properly prepared. Pipes, pumps and machinery must be drained of oil, fuel and water before collection. Tanks and anything that held fuel or chemicals must be cleaned, gas-freed and opened. Residual oil or heavy sludge leads to a weight deduction or a lower grade. Read clean vs dirty scrap grading for how deductions are applied.

Sell Your Marine Scrap in Singapore

Call or WhatsApp for an instant quote. Pickup across Singapore.