
Copper Scrap Buyer in Singapore
From $9.00/kg for Bright copper · Pickup across Singapore · Same-day payment
We buy copper scrap in Singapore — bright copper, copper cable, braziery, and No.1/No.2 copper — at competitive daily rates. Islandwide pickup, same-day payment.
Current Copper Scrap Prices
Prices updated weekly against the London Metal Exchange (LME). Call +65 9106 7577 for a firm quote on your load.
📋 Prices indicative only. Rates below benchmark against the London Metal Exchange and adjust with market movement. For a firm per-kg quote on your specific load, call +65 9106 7577 or WhatsApp us — we quote free, no obligation.
| Grade | Price per kg (SGD) | Notes |
|---|---|---|
| Bright copper (No. 1) | $16.20/kg | Dry, clean, bare, uncoated copper wire — 1/16″ thick min. |
| Copper cable (75% yield) | $9.50/kg | PVC-insulated copper cable, plastic sheath. |
| Braziery / irony copper | $5.50/kg | Copper with iron attachments, solder, or oxidation. |
| Tinned copper | $15.70/kg | Tinned / plated copper wire or sheet. |
Copper Price Per Kg in Singapore Today
The copper price per kg you see online is usually the LME price for refined copper cathode, quoted in US dollars per tonne. Scrap copper is paid below that, because it still has to be sorted, melted and refined. How far below depends on the grade — the cleaner the copper, the closer you get to the LME price.
To turn the LME price into a rough per-kg figure, divide the US dollar price per tonne by 1,000, then convert to Singapore dollars. That gives you the ceiling. The scrap rate for each grade sits under it, as in the table above.
What Moves the Copper Price Per Kg
- The LME copper price — it moves every trading day. See our LME guide.
- The USD/SGD exchange rate — LME prices are in US dollars, so a stronger Singapore dollar lowers the local rate.
- Grade — bare bright wire pays the most; insulated cable and braziery pay less. See copper scrap grades.
- Volume — larger, regular loads earn better rates.
For a figure on your own load, use our scrap metal calculator or send us a photo on WhatsApp. If you are unsure when to sell, see when to sell scrap metal.
How We Buy Copper Scrap
- Call or WhatsApp us at +65 9106 7577 with an approx. weight and type. We’ll give you an indicative price on the phone.
- Free pickup from anywhere in Singapore for substantial industrial loads (factories, construction sites, warehouses, engineering and process plants). For smaller or residential quantities, drop off at our 170 Gul Circle yard during business hours — we handle unloading and payment on arrival.
- Weigh & inspect on certified scales. We show you the reading on the spot.
- Firm quote based on grade and the day’s LME rate.
- Same-day payment via bank transfer, cheque, or cash.
Why Choose Molten Steel for Copper Scrap
- 17+ years of experience buying copper scrap from Singapore factories, construction sites, and marine yards.
- Transparent pricing — LME-benchmarked, updated weekly, posted on this page.
- Licensed & compliant — fully licensed scrap metal dealer, NEA-compliant handling.
- Islandwide pickup — any SG postal code, free for substantial industrial loads. Smaller quantities welcome as drop-offs at our 170 Gul Circle yard.
- Same-day payment — no waiting, no invoicing games.
Frequently Asked Questions
What copper scrap do you buy in Singapore?
We buy all grades and forms of copper scrap — see the price table above for the main categories. If your load doesn’t fit a listed grade, call us and we’ll quote on inspection.
How much is copper scrap worth in Singapore?
Current copper scrap prices in Singapore range from the rates shown above, benchmarked against the London Metal Exchange (LME) daily. Call +65 9106 7577 for today’s firm quote.
Do you collect copper scrap from my location in Singapore?
Yes — we collect from any Singapore postal code for substantial industrial loads (factories, construction sites, warehouses, engineering and process plants). Smaller or residential quantities are still welcome — drop off at our 170 Gul Circle yard during business hours and we handle unloading and payment.
How fast can you pick up?
Same-day for most loads within west Singapore (Jurong, Tuas, Sungei Kadut, Woodlands). 24-48 hours for the rest of the island. Urgent pickups can be arranged — just call.
How are loads weighed and paid?
We weigh on certified calibrated scales at our yard or on our pickup truck. Payment is same-day via bank transfer, cheque, or cash for smaller amounts.
Other Metals We Buy
Copper Grade-by-Grade Identification Guide
Copper is paid on grade, not weight alone. See our copper grades guide for the full taxonomy; below are the grades we see most often.
- Bright copper (No. 1): shiny reddish-orange, 1/16″ (1.6 mm)+, unalloyed, uncoated. From stripped new wire, bus-bar offcuts, clean winding. Top rate.
- Heavy copper (No. 2): dull brown with light oxidation — clean pipe, flashing sheet, tarnished bus-bar. Watch for solder, paint, iron fittings.
- Copper cable: PVC/XLPE-coated. Paid at 55–75% of bright rate depending on recovery ratio; thicker cable recovers more.
- Tinned copper: silver-grey coat over copper core (marine, battery lugs). 10–20% below bright because tin must be stripped at smelter.
- Braziery: copper with solder, brass, or iron attached — car radiators, old HVAC coils. Snap off attachments where possible to upgrade.
Preparation Tips to Maximise Copper Payout
A 30-minute pre-sort on site often lifts payout 15–25%. In order of pay-back:
- Strip thick PVC cable to move it from cable rate to bright. Use a rotary stripper for 16 mm² and above. See our stripping guide.
- Remove brass and iron attachments from copper pipe — each fitting downgrades the whole piece to braziery.
- Keep bright and heavy separate — mixing forces the lower rate on the full bag.
- Never burn insulation. Open burning is illegal in Singapore under NEA rules, and burnt copper is downgraded anyway.
- Drain oil and refrigerant from HVAC copper before loading.
Where Copper Scrap Comes From in Singapore
- Electrical renovation: THHN, SWA armoured, ring-main from HDB upgrading and condo MEP refits.
- HVAC replacement: refrigeration pipe (1/4″, 3/8″, 5/8″), coil banks, compressor tube.
- Plumbing replacement: Type L / Type K pipe from commercial re-pipes and kitchen renovations.
- Demolition wiring: bulk cable pulls from decommissioned factories in Jurong and Sungei Kadut.
- Telecoms decommission: jelly-filled telephone cable, coax, data-centre whip from fibre migration.
- Motor rewinds: enamelled winding wire (graded as No. 2 due to enamel coat).
Scheduled tonnage pricing available for data centres, industrial decommissions, and shipyards — see our copper supplier page.
What Happens After We Buy Your Copper
We bin by grade, bale clean copper on a hydraulic baler, and granulate cable to recover 99%+ of the copper pellets. Bales ship to regional smelters in Malaysia, Thailand, and beyond, where material is fire-refined in an anode furnace, electro-refined to 99.99% cathode, and cast into rod, wire bar, or billet.
That new copper goes straight back into cable, plumbing tube, and electronics — often returning to Singapore within 6–10 weeks. Copper recycles infinitely with no loss of conductivity. Secondary copper uses ~85% less energy than virgin smelting, which is why your scrap has a real commodity price tracked daily on the London Metal Exchange.
If you are new to the commodity side of scrap, our scrap metal glossary covers the terminology used on tickets and quotes, and our ferrous vs non-ferrous identification guide explains why copper (alongside aluminium, brass, and stainless) sits in the higher-value non-ferrous bracket versus carbon-steel scrap.
More Frequently Asked Copper Questions
How do I tell bright copper from heavy copper?
Bright is shiny reddish-orange, uncoated, 1/16″ thick or greater. Heavy is dull brown with oxidation or is thinner sheet. Any solder, tin coat, or brass fitting drops it to braziery. WhatsApp a photo and we will grade before pickup.
Why does insulated cable pay less than bright copper?
We pay on recovered copper weight, not gross. A typical PVC cable is 55–75% copper by mass; the rest is insulation that must be granulated. Thicker conductors hit the top of that band, thin control cable the bottom.
Should I strip my own copper wire?
Worth it on thick cable (16 mm²+) — a rotary stripper lifts you from cable rate to bright. Not worth it on thin control cable or steel-wire-armoured cable; our granulator does better. See the stripping guide.
Do you buy enamelled copper from motor rewinds?
Yes, graded as No. 2 because the enamel coat burns off at the smelter. Keep separate from bright — mixing drops the whole bag. Monthly scheduled pickup available for rewind shops.
Can I sell burnt copper wire?
Yes, but at a discount — burning creates surface oxide that needs extra smelting, and on-site burning is illegal under NEA rules. Bring mechanically stripped or intact insulated cable instead.
Do you pay the LME copper price?
We quote a percentage of the daily LME cash-settlement price, adjusted for grade, moisture, and load size. Use our scrap metal calculator for an instant estimate or call +65 9106 7577 for a firm quote.
How We Receive Copper Loads — Bins, 40-Footer, Low-Bed
Copper loads typically arrive as drop-offs from electrical contractors, MEP firms, and demolition crews — bright wire, cable bundles, busbar offcuts, refrigerant pipe. For larger or recurring producers we provide receiving infrastructure so the strip-out work stays on programme.
- Walk-ins accepted at our 170 Gul Circle yard during business hours (Mon–Sat 8:30am–6:30pm, Sun 8:30am–3:30pm).
- Free scrap bins on site for ongoing producers — we drop bins in common sizes and rotate them on a schedule you choose. Sorted bins (ferrous separate from non-ferrous) earn a higher price per kg.
- 40-footer trailer for long stock — structural beams, profile material, bar, tube, and any item that exceeds standard truck-bed length.
- Low-bed trailer for oversized cargoes — large machinery, vessel internals, complete heat-exchanger bundles, generator sets, transformers, and decommissioned plant.
We lead with receiving infrastructure rather than on-site removal labour. That keeps our per-kilogram quotes ahead of dealers who bundle haulage labour into the price — you handle the lift (or your contractor does), and we handle everything from the weighbridge onward. For larger clearances where the job size justifies it, our own team can handle the removal too.
For copper bus bar drops and switchgear-fabrication scrap see our engineering scrap page.
Copper Scrap: Quick Answers
Do I need ID to sell copper scrap in Singapore?
Yes. Individuals need their NRIC or FIN, and businesses need their ACRA bizfile. Licensed dealers record seller details on every transaction, and this matters for copper because it is a common target for theft. A buyer who takes copper with no questions asked is a warning sign. Payment is made by PayNow or bank transfer, with an itemised receipt.
Can I sell a small amount of copper, like 1 kg?
Yes. Small amounts of copper are welcome as drop-offs at our yard at 170 Gul Circle, while free pickup is for loads that meet the pickup minimum. Copper is priced per kilogram by grade, so even a small bag of clean, bare wire is worth bringing in. Check our scrap metal prices page for indicative rates before you come.
Is copper magnetic, and how can I spot copper-plated steel?
Copper is not magnetic, so a magnet should not stick to genuine copper wire or pipe. If a magnet grabs it, the item is probably copper-plated steel or has steel fittings attached, and it will not be paid at copper rates. Scratching the surface also helps, because a plated item shows grey metal underneath. At our yard, grading is confirmed by inspection, with XRF testing for alloys.
Is copper scrap worth more than brass?
Yes, clean copper normally pays more per kilogram than brass. Brass is an alloy of copper and zinc, and zinc is worth less than copper, so brass is priced below good copper grades. Keep the two separate, because a brass fitting left on a copper pipe can downgrade the piece. See our brass scrap page for how brass is graded.
Do you buy copper-nickel scrap?
Yes, we buy copper-nickel alloys such as 90/10 and 70/30, which often come from marine piping and condenser tubes. They are special alloys, so we do not publish rates; please call to enquire with photos and an estimated quantity. Keep copper-nickel separate from ordinary copper, because it is graded and priced differently. See our special alloys page for details.
Ready to Sell Your Copper Scrap?
Call or WhatsApp for an instant quote. Pickup across Singapore.
